Golf simulator component fit: mats, nets and screens

Start with the finished hitting position

A component list becomes useful when every dimension has a named endpoint. Draw the ball position and target line first. Add the monitor position from its own instructions. Keep the top of the mat separate from the floor, and mark where the net or screen sits when assembled.

Use the model-specific room chart to read the monitor requirements. The ceiling-height guide explains why a mounting measurement cannot establish personal swing clearance. The monitor directory links each model to its documented software and placement records.

Compare the exact mat size and thickness

The GoSports PRO rectangle reviewed here measures five by four feet and is 15 mm thick. The maker lists six teeing positions and three rubber tees. This describes the named PRO product. Other GoSports sizes, shapes, inserts and thicknesses need their own check.

Record these fields before ordering:

A five-by-four footprint alone cannot confirm the rest of the setup. For the Garmin R10, use the documented tripod and sensor-height instructions. For the MLM2PRO, check its placement distances and the ball type used for spin measurements. We have not tested this mat with either monitor.

Keep containment depth and ball flight separate

The selected Home net row lists a seven-foot width, three-foot-six-inch depth and seven-foot height. Those are product dimensions. The Net Return’s current product page tells buyers to check width, height and depth, then allow for the full swing. It also directs buyers to the launch monitor’s own ball-to-net and room-depth requirements. Choose the exact net size before using a dimension from its multi-product comparison.

Keep a measurement list with separate rows for monitor-to-ball distance, ball-to-net distance, assembled containment depth and any wall clearance in the installation instructions. The sensor and ball-flight distances do not include every other segment of a room.

Check the maker’s current assembly and use instructions for side protection, overhead protection, anchoring, inspection, wear and permitted balls. A separate impact screen can change the setup. Do not carry a net-only footprint into a screen-and-frame installation by assumption.

Treat a screen and projector as a separate fit decision

Record the screen’s usable image width, aspect ratio, frame dimensions, required clearance and mounting method. Distinguish the viewable area from the outer frame. Check whether the listing includes the screen, frame, side panels, mounting hardware and projector protection.

BenQ specifies a 0.69–0.83 throw ratio for the TK710STi. That is a lens-distance-to-image-width relationship. It does not determine the complete installation envelope. Use the exact projector guide and BenQ tools to check offset, image size, mounting, obstacles and the cable path.

The GSPro PC requirements page keeps the intended output resolution beside the computer requirements. Match the PC output, adapter, HDMI cable and display input separately. A 4K-capable projector does not establish that an unspecified PC meets the software’s recommended 4K configuration.

Keep unresolved checks visible before buying

Leave unknown measurements blank and name what needs checking. Ask the equipment maker or installer about the exact component and proposed arrangement. We have not measured your swing, tested these products together or assessed the room construction and ball containment.

The SC4 PRO placement page and EYE MINI placement page keep each model’s manufacturer instructions separate.

No complete working-simulator price or universal room approval follows from this reference. Use the room-fit starting point and source methodology to keep the equipment questions and source limits together.

For a net-based setup, the net selection and room checklist connects containment, display choices and monitor distances. The Home and SPG-7 fit comparison checks exact product dimensions, assembly and warranty terms.

Put the projector and frame on the same drawing

Use two outlines for the screen: the usable projected image and the assembled frame. Keep the projector lens position separate from the front or rear of its housing. A mounting position that produces the intended image can still conflict with a frame, ceiling obstruction or swing area.

For the documented TK710STi, the throw ratio above belongs to that exact model. Do not substitute a ratio from an LK936ST, an unspecified short-throw projector or a retailer's family title. A throw calculation sizes an image; it does not certify a mount, frame or safe room layout. Ask the installer to mark the actual lens position and all required clearances before ordering the mounting parts.

Keep the screen-and-frame parts list beside the net comparison. A practice net can have a different footprint and included parts from a projection enclosure, even when both appear to fit the same wall.