Golf Simulator Room Fit Finder: Captured Clearances

Enter your room length, width and floor-to-ceiling height. See which captured requirements those measurements address and which still need information. Mounting distances remain unmeasured here, with each row linked to its clearance record. It restates captured records. It never decides whether a swing is safe or which monitor to buy.

Compare room dimensions with captured clearances. Mounting distances stay unmeasured here. Each row cites its source.

Find which launch monitors fit your room

Enter the room’s inside measurements in your chosen unit. Each captured model is compared against the axes its own documented distances consume; leave a box blank and models needing that axis wait for it.

Your setup

Enter room measurements to start. The finder checks nothing until a field holds a number.

This comparison restates captured manufacturer documents. It does not assess ball containment, installation or any swing, and a row that fits is never a safe-swing verdict.

Check one model in depth · What each measurement means · How we check sources

The rest of the room

Every row below names the record it comes from and the date that source was read. Sensor-to-ball and ball-flight distances consume the room length. Mounting ranges need a separate measurement between their named endpoints. Floor-to-ceiling height does not provide it, so mounting rows remain incomplete here.

Oldest source check: . Entries stay in this tab and clear when you reload.

How this check works

How the fit is decided

The finder maps each captured clearance to one room axis. Behind-ball figures and ball-flight figures map to room length. The Eye XO mount range runs from the top of the hitting area to the bottom of the mounting bracket. Floor-to-ceiling height does not supply that measurement, so its mounting row stays incomplete here. The Eye XO2 room figures map to their named axes. It checks room length against the behind-ball ranges, R10 at 6-8 ft, Mevo+ at 7-9 ft and MLM2PRO at 6.5-8.5 ft, the 8 ft ball-flight minimums, and the Eye XO2 figure of 16 ft long. It compares floor-to-ceiling height with the Eye XO2 room-height figure of 10 ft. The Eye XO mounting range of 9-10 ft needs a separate measurement between its named endpoints. Use the ceiling validator for mat and bracket measurements. It checks room width against the Eye XO2 figure of 13 ft wide. The ST MAX records print room figures in feet and in metres that disagree. The finder shows both printed figures and chooses neither. The record says to confirm the intended figure with SKYTRAK before planning a room. The site holds 12 captured clearance records. Each result row names the record behind its figure.

What this tool does not settle

This tool does not settle swing space. A captured clearance states what its document prints. The room your swing needs sits outside these records. This tool does not settle safety. No row states that a swing is safe. This tool does not settle setup order, mounting work or ceiling protection. Those calls stay with you. Every captured record carries the condition that it covers indoor setup only and does not establish personal swing clearance or ball containment. Where a field has no captured figure, the page reads not stated in the captured records.

The source measurements

Table help

Scroll sideways to read all columns. Keyboard: focus the table area and use the arrow keys.

Equipment dimensions. Source dates: October 18, 2026. These measurements do not assess a personal swing.
MonitorDimensionMeasurement endpointsPublished valueMeaning
Garmin R10Sensor to ballsensor position to tee6 ft (1828.8 mm) to 8 ft (2438.4 mm)Setup range
Garmin R10Ball flighttee to net impact plane8 ft (2438.4 mm)Minimum
Flightscope Mevo+Sensor to ballsensor position to tee7 ft (2133.6 mm) to 9 ft (2743.2 mm)Setup range
Flightscope Mevo+Ball flighttee to net impact plane8 ft (2438.4 mm)Minimum
Rapsodo MLM2ProSensor to ballsensor position to ball6.5 ft (1981.2 mm) to 8.5 ft (2590.8 mm)Setup range
Rapsodo MLM2ProBall flightball to net impact plane8 ft (2438.4 mm)Minimum
Uneekor EyeXOMounting heighttop of hitting area to bottom of mounting bracket9 ft (2743.2 mm) to 10 ft (3048 mm)Mounting range
Uneekor EyeXO2Room widthroom boundary to opposite room boundary13 ft (3962.4 mm)Recommendation
Uneekor EyeXO2Room depthroom boundary to opposite room boundary16 ft (4876.8 mm)Recommendation
Uneekor EyeXO2Room heightroom boundary to opposite room boundary10 ft (3048 mm)Recommendation
SKYTRAK ST MAXRoom depthroom boundary to opposite room boundaryPrinted as 10 ft (3048 mm) and 3.35 m (3350 mm); the figures disagree and neither is chosenRecommendation
SKYTRAK ST MAXRoom widthroom boundary to opposite room boundaryPrinted as 10 ft (3048 mm) and 3.35 m (3350 mm); the figures disagree and neither is chosenRecommendation

Related guides

Sources (6)
Garmin: Preparing for a Shot
Preparing for a ShotRead October 18, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

between 6 ft. and 8 ft.
Preparing for a ShotRead October 18, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

at least 8 ft. (2.4 m) away from the net
FlightScope: Where should the Mevo+ be placed?
Can Mevo+ be used indoors and outdoors? How much space is needed?Read October 18, 2026
Where should the Mevo+ be placed?

Can Mevo+ be used indoors and outdoors? How much space is needed? · Publication date not stated for this section

7-9 feet sensor to tee distance
Can Mevo+ be used indoors and outdoors? How much space is needed?Read October 18, 2026
Where should the Mevo+ be placed?

Can Mevo+ be used indoors and outdoors? How much space is needed? · Publication date not stated for this section

8 feet of ball flight minimim
Rapsodo: Golf FAQ
What are the ideal space requirements to set up MLM2PRO™ indoors?Read October 18, 2026
Golf FAQ

What are the ideal space requirements to set up MLM2PRO™ indoors? · Publication date not stated for this section

6.5-8.5 feet behind the ball
What are the ideal space requirements to set up MLM2PRO™ indoors?Read October 18, 2026
Golf FAQ

What are the ideal space requirements to set up MLM2PRO™ indoors? · Publication date not stated for this section

8 feet is needed from ball to the net
Uneekor: How much space is needed for setup?
How much space is needed for setup?Read October 18, 2026
How much space is needed for setup?

How much space is needed for setup? · Publication date not stated for this section

mounted between 9 ft - 10 ft off the ground
Uneekor: EYE XO2
SpecificationsRead October 18, 2026
EYE XO2

Specifications · Publication date not stated for this section

13 ft wide × 16 ft deep × 10 ft high
SKYTRAK: User Guide
Minimum Unobstructed Area DimensionsRead October 18, 2026
User Guide

Minimum Unobstructed Area Dimensions · Publication date not stated for this section

Length: 10 feet (3.35m)

The feet figure printed in this line of the ST MAX user guide. The metre figure printed beside it (3.35 m) does not agree; both are kept on the record and neither is chosen.

The metre figure printed in this line of the ST MAX user guide. The feet figure printed beside it (10 feet, 3048 mm) does not agree; both are kept on the record and neither is chosen.

Minimum Unobstructed Area DimensionsRead October 18, 2026
User Guide

Minimum Unobstructed Area Dimensions · Publication date not stated for this section

Width: 10 feet (3.35m)

The feet figure printed in this line of the ST MAX user guide. The metre figure printed beside it (3.35 m) does not agree; both are kept on the record and neither is chosen.

The metre figure printed in this line of the ST MAX user guide. The feet figure printed beside it (10 feet, 3048 mm) does not agree; both are kept on the record and neither is chosen.

This document supports the cited model or software requirement. We have not performed hands-on equipment testing.

GolfCompat provides planning information. Confirm the instructions for your exact equipment and have your room, swing clearance, and installation assessed before use. A listed equipment requirement does not certify personal safety.