Room planning

Garmin R10 Space Requirements: Room and Placement

The Garmin R10 sits behind the ball, and its captured clearance records carry two indoor distances: 6 to 8 feet from sensor to tee and at least 8 feet of ball flight to the net. The page shows those records with dates and sources, separates them from swing space, and links the room validator.

Placement and technology

Name
Garmin R10
Sensor placement
Behind the ball
Measurement technology
radar

Room measurements

Table help

Scroll sideways to read all columns. Keyboard: focus the table area and use the arrow keys.

Equipment dimensions. Source dates: October 18, 2026. These measurements do not assess a personal swing.
MonitorDimensionMeasurement endpointsPublished valueMeaning
Garmin R10Sensor to ballsensor position to tee6 ft (1828.8 mm) to 8 ft (2438.4 mm)Setup range
Garmin R10Ball flighttee to net impact plane8 ft (2438.4 mm)Minimum

What the Garmin R10 records cover

Garmin's indoor placement instructions put the sensor between 6 ft. and 8 ft. from the tee, with at least 8 ft. from the tee to the net. Both distances are equipment minimums only; they do not measure the space a swing needs, and screen setback and containment are separate checks.

Check the R10 distances against your room

Measure from the same endpoints as the records: sensor position to tee, and tee to net impact plane. The room validator compares your numbers with the Garmin record values and keeps a missing input visible instead of treating it as zero. The R10 model page adds the sensor type and setup notes.

Related guides

Sources (3)
GSPro: GSPro
What launch monitor devices are supported?Read November 9, 2026
GSPro

What launch monitor devices are supported? · Publication date not stated for this section

Garmin R10
Garmin: Preparing for a Shot
Preparing for a ShotRead November 9, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

behind the tee location
Preparing for a ShotRead November 9, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

bottom edge of the launch monitor sits above the mat
Preparing for a ShotRead November 9, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

red alignment line is aligned
Preparing for a ShotRead November 9, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

Place the launch monitor on the ground
Preparing for a ShotRead November 9, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

Attach the launch monitor to the tripod mount
Preparing for a ShotRead October 18, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

between 6 ft. and 8 ft.
Preparing for a ShotRead October 18, 2026
Preparing for a Shot

Preparing for a Shot · Publication date not stated for this section

at least 8 ft. (2.4 m) away from the net
Garmin: Accuracy of Approach R10 Radar
Radar AccuracyRead November 9, 2026
Accuracy of Approach R10 Radar

Radar Accuracy · Publication date not stated for this section

uses radar to analyze several metrics

This document supports the cited model or software requirement. We have not performed hands-on equipment testing.

GolfCompat provides planning information. Confirm the instructions for your exact equipment and have your room, swing clearance, and installation assessed before use. A listed equipment requirement does not certify personal safety.